The list of harmonised standards for the PED has been updated by a new publication of the EU Commission. New standards were included or previously published standards were updated. The date of deletion from the list (End of presumption of conformity) has already been specified for some updated standards.
Important PED harmonised standards for the Pressure Equipment Directive lose their status as harmonised standards.
In order to give manufacturers sufficient time to adapt their products to the revised versions of harmonised standards it is necessary to defer the withdrawal of the reference of same standards.
Presumption of conformity
Pressure equipment or assemblies which are in conformity with harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union shall be presumed to be in conformity with the essential safety requirements covered by those standards or parts thereof, referred to in Annex I of PED.
List of updated standards:
| Standard (replaced) | Standard (new) | Title of standard | End of presumption of conformity the replaced standard | Date of start of presumption of conformity the new standard |
|---|---|---|---|---|
| EN 19:2016 | EN 19:2023 | Industrial valves – Marking of metallic valves | 31. July 2026 | 31. Jan. 2025 |
| – | EN 12261:2024 | Gas meters – Turbine gas meters | – | 31. Jan. 2025 |
| EN 12952-3:2011 | EN 12952-3:2022 | Water-tube boilers and auxiliary installations – Part 3: Design and calculation for pressure parts of the boiler | 31. July 2026 | 31. Jan. 2025 |
| EN 12952-8:2002 | EN 12952-8:2022 | Water-tube boilers and auxiliary installations – Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler | 31. July 2026 | 31. Jan. 2025 |
| EN 12952-9:2002 | EN 12952-9:2022 | Water-tube boilers and auxiliary installations – Part 9: Requirements for firing systems for pulverized solid fuels for the boiler | 31. July 2026 | 31. Jan. 2025 |
| EN 12952-16:2002 | EN 12952-16:2022 | Water-tube boilers and auxiliary installations – Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler | 31. July 2026 | 31. Jan. 2025 |
| EN 13445-2:2021 | EN 13445-2:2021 + A1:2023 | Unfired pressure vessels – Part 2: Materials | 31. July 2026 | 31. Jan. 2025 |
| EN 13445-4:2021 | EN 13445-4:2021 + A1:2023 | Unfired pressure vessels – Part 4: Fabrication | 31. July 2026 | 31. Jan. 2025 |
| EN 13480-3:2017 + A1:2021 + A2:2020 + A3: 2020 + A4:2021 | EN 13480-3:2017 + A1:2021 + A2:2020 + A3:2020 + A4:2021 + A5:2022 | Metallic industrial piping – Part 3: Design and calculation | 31. July 2026 | 31. Jan. 2025 |
| – | EN 13799:2022 | LPG equipment and accessories – Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels | – | 31. Jan. 2025 |
| EN 15001-1:2009 | EN 15001-1:2023 | Gas Infrastructure – Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations – Part 1: Detailed functional requirements for design, materials, construction, inspection and testing | 31. July 2026 | 31. Jan. 2025 |
| EN 15776:2011 + A1:2015 | EN 15776:2022 | Unfired pressure vessels – Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 % | 31. July 2026 | 31. Jan. 2025 |
Read More
Last implementing Decision (EU) 2025/165 published on Official publication in the EU Official Journal, dated 31. January 2025 on the withdrawal of the harmonised status of PED standards
