The European powerful online platform with manufacturers and suppliers of pressure equipments​

FAQ

FAQ Category: ASME BPVC Engineering

Pressure Equipment Manufacturer and Supplier Directory​

Vendor entries are free

Simple Vendor Registration in 3 Steps

Vendor Registration
ASME BPVC Name Plate

The maximum allowable working pressure MAWP is a very important therm in the ASME BPVC and therefore essential for construction safety. The ASME BPVC requires, that the manufacturer specify the MAWP on the nameplate of the pressure vessel and should …

The maximum allowable working pressure MAWP is a very important therm in the ASME BPVC and therefore essential for construction safety. Note: The MAWP is not defined in the PED. The maximum allowable working pressure (MAWP) is: (see also UG-98)

U-stamp and CE Marking

This article provides an overview of duplex material specifications for pressure equipment applications. Compared with some other materials, Standard Duplex Steels and Super Duplex Stainless Steel are less costly material of construction offering high mechanical strength, good weldability, good toughness …

plant

Stress corrosion cracking (SCC) is characterized by cracks propagating either transgranularly or intergranularly (along grain boundaries). Chlorides are widely present in many industrial and natural environments, such as seawater. When metal alloys are exposed to these environments, they can become …

EN 13445 and ASME BPVC Section VIII

The PREN (Pitting Resistance Equivalent Number) for duplex steels is an important parameter for classifying duplex steels also from the point of view of corrosion resistance, such as chloride stress corrosion cracking (SCC). Duplex materials have evolved in recent decades …

U-stamp and CE Marking

Weldolet fittings – the Branch Connection Fittings are also named as Outlet fittings. Outlets are a family of forged products used to make 90 degree or 45 degrees integrally reinforced branch connections from a header pipe or run pipe to an outlet pipe or …

Valve-02

The ISO 5208 rate A specify a leakage by internal tightness seat test (or often also called closure test) of valves. Usually one side (valve inlet) shall be subjected to the test pressure and amount of leak shall be measured …

U-stamp and CE Marking

Pressure-relieving valves and devices shall conform to the requirements specified standards and specifications. Additional requirements for certification and marking requirements such as PED (CE marking) and ASME BPVC (Designation stamp) should be apply. Below is a list of the most …

Pipes and line pipes

Piping in acc. to ISO 3183 and API SPEC 5L must be evaluated with regard to their suitability for the use of hydrogen. Additional test procedures at qualifications of line pipes are required. Specifications and standards Specifications and standards for …

DIRECTORY

for
Manufacturers & Suppliers
Features:
  • Link directly to your Website
  • Company type
  • Location
  • Brief description of your company
  • Products limits dia., length & weight
  • Main used mat'l groups ISO/TR 15608
  • Directory is supported by professional Engineers
For free

Simple registration in 3 steps:

  1. Registration only with name, e-mail, company name,
  2. Approval and sending login data by PED directory team
  3. The vendor sends the prepared form with the details for the vendor directory listing

FAQs 
for Manufacturer/Suppliers

Yes, entries for any product categories are free.

No, the period can be agreed for a fixed term without a subscription.

After finding your interested manufacturer, you can contact him by clicking the Link on LOGO or Company Name