Guideline C-05
Yes, in accordance with Article 19 paragraph 1, but the identification mark of the notified body is left out if the manufacturer has selected the use of module B EU-Type examination – design type. Reason:The applied conformity assessment procedure is defined in table 4 of the Annex II, where the modules B EU-type examination – […]
Guideline C-14
As stated in PED Guideline C-05, Article 4 paragraph 2 (last sentence) assemblies comprise, as a minimum, the boiler with its protective devices. However, it is sufficient that the manufacturer of the boiler obtains an EU- Type examination – design type certificate, provided that he clearly specifies in his installation instructions the suitable protective device […]