Guideline C-13
The definition of assemblies in Article 2(6) does not prohibit non PED pressure equipment (pressurised equipment excluded by Article 1 paragraph 2 to be included in an assembly covered by the PED. In the case of a PED assembly, the global conformity assessment required by Article 14 paragraph 6 does not include the assessment of […]
Guideline C-14
As stated in PED Guideline C-05, Article 4 paragraph 2 (last sentence) assemblies comprise, as a minimum, the boiler with its protective devices. However, it is sufficient that the manufacturer of the boiler obtains an EU- Type examination – design type certificate, provided that he clearly specifies in his installation instructions the suitable protective device […]
Guideline C-20
Two different cases have to be considered: However for either case the correct incorporation has to be assessed against PED, see PED Guideline C-13. Note:See also PED Guideline A-33
Guideline B-40
The pressure accessory does not become a safety accessory by putting both accessories together. The combination does not expand the different functions of the individual items. Both accessories shall be subjected to appropriate conformity assessment and marking. Note 1:A pressure accessory equipped with a safety accessory is not an assembly because it does not constitute […]