Guideline I-07
Safety accessories exclusively manufactured and put on the market for specific pressure equipment or assemblies covered by Article 4 paragraph 3 of the PED shall not bear the CE marking under the PED (but see Note 2). Furthermore, safety accessories exclusively intended for equipment not covered by the PED are also not covered by the […]
Guideline D-11
No, only the complete safety device can be conformity assessed, and only one CE marking shall be affixed. The CE marking shall be on the holder which is less likely to be replaced. The declaration of conformity and instructions for use shall describe in an appropriate manner the components of the bursting disc safety device, […]
Guideline B-01
In accordance with annex II point 3, pressure accessories have to be classified using the appropriate table(s) of annex II on the basis of their PS, their V and/or DN, and the group of fluids for which they are intended. Pressure accessories with low PS, volume and/or DN will therefore fall under the requirements of […]