Guideline F-05
The definition in Article 2 (13) also covers other permanent joints such as e.g. those produced by brazing, braze welding, expansion, gluing, frettage and riveting. For that reason, the requirements of Annex I Section 3.1.2 and 3.1.3 apply also for these types of joints. Note:Removable expansion devices (e.g. expansion plug for sealing exchanger tubes) do […]
Guideline F-06
In the absence of harmonized standards, the manufacturer shall refer to an existing document (draft standard candidate for harmonization, professional document, guide, recognised third party/notified body document, company document, etc.) or shall establish a specific document. Such a document shall define at least: See also PED Guideline F-01. For welding, see PED Guideline F-12.
Guideline F-11
In the absence of harmonized standards, the manufacturer shall refer to an existing document (draft standard candidate for harmonization, professional document, guide, recognised third party/notified body document, company document) or shall establish a specific document. Such a document shall define at least: Note:The directive states that “the properties of permanent joints must meet the minimum […]